08.04.2008

We are pleased to introduce a new version of SmartMoto v3.14.

With this release we present the following options.

1. World’s first, Unlock, Repair EEPROM and Format FFS solution for the model W230.
2. Reorganized Format FFS procedure for W156/W160.
3. Implemented some improvements to the functionality algorithm for Compal+ and Locosto models.

31.03.2008

27.03.2008

We are pleased to introduce a new version of S-Card 2.08 and SmartMoto v3.13.

With this release we present the following options.

1. World’s exclusive, Unlock solution for Motorola U3 (Prepare Smart TestPoint).
2. World’s first, unlock of V3re, boot version 0C.F4 (Prepare Smart TestPoint).
3. Repair PDS and Flash support for V3i with flash chip size 64Mb.

18.03.2008

Please note that new version of ActiveX client with manual select of the LPT port address is uploaded to Smart-Clip Update Zone.

04.03.2008

We are pleased to introduce a new version of Smart-Clip v4.07, S-Card 2.07 and SmartMoto v3.12.

With this release we present the following options.

1. Unlock of Motorola W5 (Prepare Smart TestPoint).
2. Released "Automatic Disable USB Printing Connection" while detecting the models W510, W490, W5 etc.
3. The models W156 and W160 are added to the SmartMoto list (Unlock only).
4. Reorganized "Repair EEPROM" function for some Compal models.

27.02.2008

We are pleased to introduce a new version of SmartMoto v3.11 and Smart Adaptor v1.04.

With this release we present improvement in PDS repair process for the following models.

1. À1200_R532
2. À1200_R541
3. E6_R533
4. L2_R3511
5. L6 all fw versions including R3443H1
6. L7_R44419
7. V195_R3443U1
8. V365 all fw versions including R444HL1
9. V560_R37A

For Smart Adaptor users Repair PDS option is available off line.

20.02.2008

We are pleased to introduce a new version of SmartMoto v3.10.

With this release the list of supported Compal models is corrected.

19.02.2008

We are pleased to introduce a new version of SmartMoto v3.09 and Smart Adaptor v1.03.

With this release we present the following options.

1. Unlock, world’s first Format FFS and world’s first Repair EEPROM for the models W175 and W180. The only unlock solution for W175 and W180 that doesn’t mess up the system and doesn’t require any drivers to be reinstalled or restored after unlock.
2. Repair PDS for A1200, fw version R541.

For detailed W175 and W180 Unlock procedure description please visit Unlock manual

06.02.2008

We are pleased to introduce a new version of Smart-Moto v3.08.

With this release we present improvement of the IMEI repair process for the models A1200, E2 and E6. So, it becomes the only working solution on the market yet.

NOTE. Those, who got "Invalid battery" issue after repairing IMEI on the models A1200, E2 and E6, to resolve it, please perform the following steps.

• Flash the phone with the same or the nearest higher version of *.pcf file using SCout flasher.
• Apply IMEI patch using SmartMoto v3.08, or higher version and restore the correct number.

Alternatively

• Flash the phone with boot file E6_boot_9.8.2.mfw using SmartMoto v3.08, or higher version.
• Flash the phone with the same or the nearest higher version of *.pcf file using SCout flasher.

05.02.2008

We are pleased to introduce a new version of Smart-Clip v4.06, S-Card v2.06 and Smart-Moto v3.07.

With this release we present the flowing options.

1. Resolved the issue (internal error 0009) with IMEI patching on the models C261, C275, V175, V177, W370, W377 and W375.
2. Improved communication with Argon based models comparing to the previous SmartMoto version. Error 3C will not appear with this release.
3. For better convenience, the Update process can be performed using either Update Mirror 1 or the Update Mirror 2. Please check the percentage scale and select the less loaded channel.

04.02.2008

We are pleased to introduce a new version of Smart-Clip v4.05, S-Card v2.05 and Smart-Moto v3.06.

With this release we present the flowing options.

1. IMEI repair firmware patch via TestPoint for the models A1200, E2 and E6.
2. Network IMEI patch for the models C261, W370 and W375. Also, for the models C275, V175 and W377 (requires to be tested with the network).
3. Read info, using Smart-Clip connection, for the models A1200, E2 and E6 (E6 - firmware and language pack version only).
4. For better convenience, the Update process can be performed using either Update Mirror 1 or the Update Mirror 2. Please check the percentage scale and select the less loaded channel.

26.01.2008

We are pleased to introduce a new version of Smart-Clip v4.03 and S-Card v2.03.

With this release Smart-Clip standalone "One Button" unlock process is fixed.

25.01.2008

We are pleased to introduce a new version of Smart-Clip v4.02, S-Card v2.02 and SmartMoto v3.05.

With this release we present improvement in the process of restoring Temporary backup for the phone model V9 with boot version higher than 5.70.

Warning. Starting from SmartMoto V3.04 the model Foma M702iG may not work with the old Smart TestPoint cable. In this case, please modify your cable to the version 2.0.

21.01.2008

We are pleased to introduce a new version of SmartMoto v3.04.

With this release we present:

1. World’s first, unlock K1s with boot version 0D.C0 (0D.C1 beta test). Smart TestPoint cable v2.0*.
2. Unlock V9, boot version 5.80 (beta test).
3. Released alternative Smart-Clip Update Zone at www.gsmserver.com.

*Smart TestPoint cable v2.0. During unlock process the phone model K1s requires more stable signal to be sent from the Smart-Clip. Due to this Smart-Clip R&D team have developed a new version of Smart TestPoint cable v2.0. Those, who already have Smart TP cable, can perform a simple modification of their cable to the version 2.0 according to the modification schematic. Otherwise, the cable can be purchased at www.gsmserver.com.

10.01.2008

We are pleased to introduce the first update of the New Year 2008, a new version of SmartMoto v3.03.

With this release we present:

1. Repair EEPROM and Format FFS for W377 phone model. World’s first.
2. Word’s exclusive IMEI repair solution for Sony Ericsson T250, Z250 and Z320.

27.12.2007

Please accept the greetings and best wishes for the New Year 2008.

And now, we are pleased to introduce a new version of Smart-Clip v4.01, S-Card v2.01, Smart Adaptor v1.02 and SmartMoto v3.02.

With this release we present:

1. Offline* repair PDS option for USB Smart Adaptor owners.
2. Released repair PDS option for the model V195, fw R3443U1 and L7, fw R44419.
3. Unlock solution for W377 (beta test).
4. New ActiveX client, supporting USB Smart Adaptor, is installed to www.boot-loader.com site.

*Offline PDS repair is available for USB Smart Adaptor owners. Those, who don’t have a USB Smart Adaptor yet, can use Repair PDS option in the usual way with Internet connection.

Detailed unlock procedure description for W377 is located in Unlock Manual.

21.12.2007

We are pleased to introduce a new version of SmartMoto v3.01.

With this release we present:

1. Released Unlock solution for Sony Ericsson Z320i and Z250i.
2. Supported Unlock for V3õõ with boot version 4.10 (beta test).
3. Modified boot sending procedure for Compal W2xx series and F3.
4. SE models are moved to the separate tab "SE phones" in SmartMoto interface.

Note
In case of having difficulties with connection of Sony Ericsson T250i, Z320i and Z250i please modify data cable according to the diagram with 2 low power Zener Diodes. The required Zener Diode value is 3.3V and 0.35-0.5W (for example, model 1N5988B). For more details please see cable schematic.

20.12.2007

You have unique opportunity to buy Combo Smart-Clip Set. Just for 329 USD you will receive well-known Smart-Clip with S-card + Smart Adaptor - device that was designed to connect Smart-Clip to USB port. Please, note: the offer is limited in time and valid through February 2008.

Smart-Clip with S-Card can now be purchased for 299 USD only.

13.12.2007

We are pleased to introduce a new version of Smart Adaptor v1.01, S-Card v2.00, SmartMoto v3.00 and Smart-Clip v4.00.

With this release we present.

1. World’s First, Completely Free unlock solution for Sony Ericsson T250i. Tested on all versions.
2. Foma M702IS with boot version 2.90 is added to the list of Smart TestPoint supported (beta test).
3. Changed boot sending process for Compal W2xx series and F3.
4. SmartMoto becomes compatible with Smart Adaptor. Connection method (USB or LPT) can be selected in the Smart-Clip tab.
5. Released a new version of S-Card update client v1.05:
• Supports Smart-Clip connection via LPT or Smart Adapter;
• Added Persian language to the interface.
6. The new ActiveX client is uploaded to the Update Zone at www.smart-clip.com (Supports Smart-Clip connection via LPT or Smart Adaptor).

Detailed unlock procedure description for Sony Ericsson T250i is located in Unlock Manual.

To attention of those whose handsets got harmed with SmartMoto v2.48. We are currently working on repair solution for them. Please wait for one of our next updates.

04.12.2007

Congratulations on the first S-Card anniversary!

We are pleased to introduce a new version of S-Card v1.53 and SmartMoto v2.47.

With this release we present the following options:

1. Unlock and Repair EEPROM for all versions of F3, including the latest boots.
2. Stabilized and improved connection process for W2xx Compal models.

Detailed description of F3 unlock process is located in Unlock Manual.

28.11.2007

We are pleased to introduce a new version of SmartMoto v2.46.

With this release we present the following options:

1. The Unlock procedure for the Compal based models W205, W208, W209, W215, W218 is totally reorganized and simplified. So, now, it’s performed in just 3 steps:
• Connect Powered OFF handset.
• Press Unlock button in SmartMoto.
• Press Power ON button on the phone.
The rest of the procedure will be performed by SmartMoto automatically. More detailed Unlock manual can be found here.
Also, released Format FFS (reset user code) and Repair EEPROM options for the specified above models.
2. Added Persian language to the SmartMoto interface.

Please remember that all Compal models require to be connected to PC using COM cable or USB cable with virtual COM port emulator.

21.11.2007

We are pleased to introduce a new version of SmartMoto v2.45.

With this update we present Unlock solution for the following Compal based models

• W205
• W208
• W209
• W215
• W218

Detailed Unlock manual is located at unlock manual.

Please remember that all Compal models require to be connected to PC using COM cable or USB cable with virtual COM port emulator.

13.11.2007

We are pleased to introduce new versions of SmartMoto v2.44 and S-Card v1.52.

With this update we present the following options.

1. Developed unlock solution for the model W490 (Prepare Smart TestPoint).
2. Released support for SE J110i and J120i with the new type of flesh chip.

09.11.2007

We are pleased to introduce new versions of S-Card v1.51 and SmartMoto v2.43.

With this update we present the following options.

1. First in the world released unlock option for Foma M702iS (Prepare Smart TestPoint).
2. Added unlock support for RAZR2 V9 (Prepare Smart TestPoint).
3. Corrected direct unlock process for SE J110 and J120 and disabled read codes option.
4. Released Read User Code option for Chi Mei based phones.
5. Enabled option Reset User Code to default value for Chi Mei based models including SE J110 and J120.

26.10.2007

We are pleased to introduce a new version of SmartMoto v2.42.

With this update we add the models with boot versions A.B3 and A.B4 to the range of supported by Prepare function (First in the world).

25.10.2007

We are pleased to introduce new versions of S-Card v1.50 and SmartMoto v2.41.

With this update we present some new Special solutions:

• Released Read codes/Unlock solution for SE J110i and J120i phone models (SmartMoto, Chi Mei tab);
• World's exclusive, Enabled IMEI repair option for SE J110i and J120i phone models (SmartMoto, Chi Mei tab).

24.10.2007

We are pleased to introduce new version of SmartMoto v2.40.

With this update we present a new, World's Exclusive solution:

• New boot versions of Argon based models are added to Smart Boot Detect system. So, from now on, the boots lower than 3.02 are supported.
• Model V3xx with boot version 2.Å3 is tested and approved to be supported by Prepare Smart TestPoint function.

18.10.2007

We are pleased to introduce new version of SmartMoto v2.39.

With this update we are proud to present.

First in the world, released REPAIR PDS option for LTE2 ROM4 based handsets:

• L72
• L9
• V3re (V3_06)
• W510

In order to use REPAIR PDS option for listed above models Prepare Smart TestPoint is required. Smart TestPoint cable schematic and detailed Smart TestPoint process description can be found in Unlock manual at www.smart-clip.com. Also, Smart TestPoint cable is available for purchase at www.gsmserver.com. Please use only original accessories with Smart-Clip. We can not guaranty stable functions of Smart-Clip with the cables from other manufacturers. GSMserver team doesn’t bear any responsibility for the faults caused by cables from other manufacturer or for the faults caused by wrong usage of the original accessories.

03.10.2007

We are pleased to introduce new versions of S-Card v1.49 and SmartMoto v2.38.

With this update we present the following:

1. Added support of the new flash chip types on Argon series and for the model V3re.
2. New boot versions are tested and approved to be supported by automatic Smart Boot Detect system of SmartMoto.

Smart TestPoint cable schematic and detailed unlock process description can be found in Unlock manual at www.smart-clip.com. Also, Smart TestPoint cable is available for purchase at www.gsmserver.com. We recommend to use with Smart-Clip original accessories only. GSMserver team doesn’t bear any responsibility for the faults caused by cables from other manufacturers.

01.10.2007

We are pleased to introduce new versions of Smart-Clip v3.25, S-Card v1.48 and SmartMoto v2.37.

With this update we present the following:

1. First in the world, released Smart TestPoint unlock feature for V3re (V3_06).
2. Enabled flash, save/restore backup and lang_pack opiton for V3re (V3_06).
3. Added support of new types of flash chips and new versions of PDS zone.

Smart TestPoint cable schematic and detailed unlock process description can be found in Unlock manual at www.smart-clip.com. Also, Smart TestPoint cable soon will be available for purchase at www.gsmserver.com.

27.09.2007

We are pleased to introduce new version of SmartMoto v2.36

With this update we have corrected some steps of boot loading process for LTE2 ROM4 based models, connected in flash mode for Smart TestPoint prepare.

26.09.2007

We are pleased to introduce new versions of Smart-Clip v3.24, S-Card v1.47 and SmartMoto v2.35.

With this update we present some changes applied the boot loading process of Argon based models.

Developed Smart Detect of boot version for Argon based models. From now on all future boot versions are supposed to be supported. At this stage few models were tested and found to be fully compatible with Smart Detect. Listed below models with particular boot versions are approved to be supported for unlock using Smart TestPoint cable:

• V3xx and V6 with boot version 03.09 (World’s exclusive)
• K3 with boots 03.90 and 04.10
• V3xx untypical* with boot version 03.08.

*V3xx untypical includes some models with specific boot versions mostly provided by North American network providers (Cingular, AT&T etc). If the model V3xx can not be processed by Prepare cycle as a usual model, please select V3xx untypical and perform the process again.

Smart TestPoint cable schematic and detailed unlock process description can be found in Unlock manual at www.smart-clip.com. Also, Smart TestPoint cable soon will be available for purchase at www.gsmserver.com.

22.09.2007

We are introducing a new version of SmartMoto v2.34.

With this release we have improved detection and boot loading process for the models with boot version 06.12.

20.09.2007

We are pleased to introduce new versions of Smart-Clip v3.23, S-Card v1.46 and SmartMoto v2.33.

With this update we present the following options:

1. First in the world released unlock solution for the model Foma M702iG.
2. World’s first enabled save/restore backup option for Foma M702iG
3. Added Repair PDS for the model L2.
4. Improved and stabilized unlock process and save/restore backup option for Argon platform models.

Foma M702iG requires to be connected using Smart TestPoint cable. Smart TestPoint cable schematic and detailed unlock process description can be found in Unlock manual at www.smart-clip.com. Also, Smart TestPoint cable soon will be available for purchase at www.gsmserver.com.

17.09.2007

We are pleased to introduce new versions of Smart-Clip v3.22, S-Card v1.45 and SmartMoto v2.32.

With this update we enlarge the range of supported models by adding ARGON platform unlock and flash options.

So, we are proud to present:

1. World’s first, unlock of V1100.
2. Released unlock for other Argon based models:
• K3
• V3xx
• V3xx Cingular (North America)
• V6maxx
3. Enabled save/restore backup option for the specified above models.
4. Flash files and language packs for Argon are available at www.boot-loader.com.

Note
All Argon models require Smart TestPoint cable to be used while performing unlock process. Smart TestPoint cable schematic and detailed unlock process description can be found in Unlock manual at www.smart-clip.com. Also, Smart TestPoint cable soon will be available for purchase at www.gsmserver.com.

07.09.2007

We are pleased to introduce new versions of S-Card 1.44 and SmartMoto v2.31.

With this update we release the following options:

1. Added model selection by series for Prepare cycle.
2. L9 Prepare Smart TestPoint* procedure is perfected.

05.09.2007

Released new version of SmartMoto v2.30.

With this release Prepare function for the models V360 and L7 with boot 09.02 is reorganized and corrected. Also, Prepare Smart TestPoint procedure is improved.

We apologize for any inconvenience caused by the previous release.

05.09.2007

Released a new version of Smart-Clip v3.21 and S-Card v1.43.

With this release Unlock button issue is fixed.

We apologize for any inconvenience.

04.09.2007

We are pleased to introduce new versions of Smart-Clip v3.20, S-Card v1.42 and SmartMoto v2.29.

With this update we release the following options:

1. World's first. Released unlock of LTE2 ROM4 models W510, L72 and L9, using Smart TestPoint* cable.
2. No TestPoint Unlock for boot version 09.02, models V360 and L7 (Prepare Cycle).
3. Smart TestPoint cable is a universal device and will be used for future updates, such as unlock of Argon based models. The solution for those models is currently under development.

10.08.2007

We are pleased to introduce new versions of SmartMoto v.2.28 and S-Card v.1.41.

From now on S-Cards that were registered with Asian Smart-Clips are compatible with SCout flasher!

With this update we also implement the following options for i-mode handsets:

1. Reset Permanent Block feature added
2. Format User Area feature added

07.08.2007

We are pleased to introduce new versions of S-Card update client v1.04 and SCout updater v1.04.

Connection between S-Card/SCout dongle and these new versions of update clients is improved and stabilized.

02.08.2007

Smart-Clip team presents you a second stage of SCout integration. If yesterday, the majority of Smart-Clip users thought that we forgot about them, then today we would like to prove the opposite.

So, today, we are introducing SCard v1.40 and SmartMoto v2.27*.

Most of you will ask: What are the advantages of that?

Then let us give to all of you a wide explanation.

1. SCout is a powerful multiflasher with access to flash files, fully functional support and upcoming updates.
Advantage. Those, who need to perform flashing of big numbers of handsets and don’t require full Smar-Clip functions, can get a powerful multiflasher with free year of access to the biggest ever flash files collection at www.boot-loader.com at low cost (45 euro).

2. SCard becomes compatible with SCout software.
Advantage. All S-Card users get an opportunity to flash I-mode and Compal (Calypso+) models using SCout software. Flash files for them can be downloaded from SCout section at www.boot-loader.com All Smart-Clip users get access to that section right after update of their S-Cards to the latest version (v1.40).
3. PC-Flash option is fully moved from SmartMoto to the SCout software*.
Advantage. SmartMoto installation package is lowered in size. So, we have released the request of many users who were desperate to save the downloading traffic.

SCout proves its name: SC out, functions without Smart-Clip, flashing directly via PC USB port.

With this release we prove another time that our costumers are important for us and we consider their interests.

* Note to Chinese users.

Please be aware that Chinese version of SmartMoto currently stays the same (2.26) and still contains PC-Flash option. SCout compatibility for all Chinese S-Card users will be launched within few days.
We apologize for any inconvenience caused by that delay.

02.08.2007

We are glad to inform you that V8 is tested and proved to be supported by PC flash features. Flash file for that model in *.pcf format is available at www.boot-loader.com.

31.07.2007

We are pleased to introduce new versions of S-Card v1.27 and SmartMoto v2.26.

With this update we release the following options:

1. Corrected OTP status detection on V3x (AMD flash chip) and older models of C series (C450, C550 etc).
2. Improved and stabilized flashing process for some versions of *.pcf files.

30.07.2007

We are glad to inform you, that the following models: K3, L9, L72, Z6, W510 are tested and proved to be supported for PC flash features. Flashes for them can be downloaded from www.boot-loader.com in *.pcf format.

Warning
Some of the flashes might contain SP lock. So it is strictly required to reset Subsidy Code before flashing.

25.07.2007

We are pleased to introduce new versions of Smart-Clip v3.19, S-Card v1.26 and SmartMoto v2.25.

With this update we release the following options:

1. World’s first, No TestPoint Unlock (Prepare cycle) for the models K1, L7e, L71 and Z3 with the following boot versions: 0A.B2, 0A.C0, 0A.C3.
2. Boot version 0A.42 (models V3i, V3t, V3r & V3v) is added to support of Prepare function.
3. IMEI repair patch for K1, Z3, L7e, L71*.
4. View OTP status (locked/unlocked) option added.
5. Improved Prepare Cycle procedure. If the Prepare is performed from the powered handset, all information about the phone is saved by SmartMoto, so it the information like: fw version, flex, operation band, etc, will be recorded in backup.
6. Added Repair PDS for the model V3i, firmware version R4441D_G.
7. Improved flashing of the model A1200, E2, E6 from boot mode with *.pcf file.

* - please be aware that after performing repair IMEI for the models K1, Z3, L7e and L71 any future flashing will be possible by performing TestPoint connection only.

Note
Update Smart-Clip first and perform S-Card update after that only.
We recommend to use only the latest versions of Smart-Clip, S-Card and SmartMoto.

12.07.2007

We are proud to announce the premiere of COMPLETELY NEW, WORLD’S FIRST, DIRECT, STANDALONE unlock solution for Motofone F3, developed by GSMserver team – F3 Unlock Clip.

F3 Unlock Clip – is the easiest unlock solution, available on the market yet. It is operated by one button and requires to be powered from mains adapter or even 9V battery.

F3 unlock procedure description

1. Connect power to F3 Unlock Clip (9V battery can be used).
2. Connect F3UC to the handset, powered on or switched into boot mode*.
3. Press Unlock button on the clip.
4. LED on the clip starts to blink frequently. Unlock process is in progress.
5. On successful unlock, LED stops blinking and lights up for about 10 seconds.

*To switch F3 into boot mode, please power off the phone and press 3 keys combination: *#Power On. The handset display will remain blank.

NOTE
If the LED on F3 Unlock Clip, after frequent blinking starts to blink slower instead of lighting up – the unlock process failed. Please disconnect the phone from the cable, remove and insert the battery, switch the phone to boot mode and perform unlock again.

23.06.2007

We are pleased to introduce new versions of Smart-Clip v3.18, S-Card v1.25 and SmartMoto v2.24.

With this version we release the following options.

1. Unlock via TestPoint for E2, E6 and A1200 phone models.
2. Unlock via Remove RSA option for V560 (boot ver. 8.26) model.
3. Repair PDS option for A1200, E6 and V560 models.

11.06.2007

Dear users,
Please be informed that Unlock tutorials are now moved from SUPPORT section to SMARTMOTO USER’S MANUAL. For more details, please visit Smart-Clip official web site.
Smart-Clip ON!

29.05.2007

We are pleased to introduce new versions of Smart-Clip v3.17, S-Card v1.24 and SmartMoto v2.23.

With this version we release the following options.

1. Fully tested and fully working solution IMEI repairing for the following models: C975, C980, V980, V3x, E1070, E770, V1070, V1075 and V1150. This solution doesn’t affect any part of the handset firmware, also repairs incorrect patching performed with other tools.
2. First in the world, unlock WITHOUT FLASHING for E1070 fw …F11P. Just apply Unlock patch.
3. IMEI repair solution via patch for: W220, C168, C168i.
4. Improved PREPARE cycle for the higher firmware versions of E1, L2, L6 etc.
5. Tested and approved Repair PDS for the models C650, V220… fw versions R366. Those versions are supported. No additional operations have to be made.

Additional option.
From now on, there is a possibility of changing the firmware version on such models as C975, fw ...91i and E1070 fw ...F11P. As soon as the handset is flashed with the different flash file version, apply IMEI repair patch and restore original number.

Note
Update Smart-Clip first and perform S-Card update after that only.
We recommend to use only the latest versions of Smart-Clip, S-Card and SmartMoto.

22.03.2007

We are pleased to introduce new versions of SmartMoto v2.22.

With this version we release the following options.

1. Added Format FFS (reset user code) and Repair EEPROM for Compal models:
• C257
• C261
• V175
• V176
• V177
• W375
2. Enabled Repair PDS for V3i, fw R3443H3.
3. Stabilized Unlock procedure and resolved "sending boot" issue for some Compal and Chi Mei models.
4. Improved version detection for Z3 and K1 in PC flash mode.
5. Allowed flashing from boot mode in PC flash.

14.03.2007

We are pleased to introduce new versions of Smart-Clip v3.16, S-Card v1.17 and SmartMoto v2.21.

With this update we release some REVOLUTIONAL solutions.

1. First in the world! Added unlock for the Compal ("Calypso+" based) models:
• C257
• C261
• V175
• V176
• V177
• W375
No flexing or any additional action is required. No limitation. All versions are supported. Simply press UNLOCK button in SmartMoto.


2. "One button" unlock for Sony Ericsson J100.
3. Flashing in PC flash mode is now supported for the following models:
• F3
• V6
• V3xx
• V1100

Full_flash and lang_pack files for those models will be uploaded to SMARTMOTO section of www.boot-loader.com within few days. Please wait for our announcements.

Note:
For detailed unlock instructions and cable pinouts of the added models please visit our support section.

02.03.2007

We are pleased to introduce new versions of Smart-Clip v3.15, S-Card v1.16 and SmartMoto v2.20.

With this release the REPAIR IMEI option is enabled without connecting to the Internet. So, Smart-Clip users can stay offline while repairing the handsets.

23.02.2007

We are pleased to introduce new versions of S-Card v1.15 and SmartMoto v2.19.

There are TWO main options for Chi Mei models released in this update:

1. Added unlock for MPx200 and MPx220 via code calculation.
2. Simplified unlock for the listed below models:
   • C168
   • C168i
   • V690
   • V872
   • V878
   • W220

There is no need to calculate codes for those handsets. From now on, they can be simply unlocked by pressing "Unlock" button in Chi Mei tab of SmartMoto.

Please visit the SUPPORT section at www.smart-clip.com to find a detailed description of unlock procedure for Chi Mei based models.

14.02.2007

We are pleased to introduce new versions of Smart-Clip v3.14, S-Card v1.14 and SmartMoto v2.18.

With this release the following options are added.

1. Unlock via code calculator for Chi Mei based models.
• C168
• C168i
• V690
• V872
• V878
• W220
2. Improved and simplified SmartMoto interface.

Please visit the SUPPORT section at www.smart-clip.com to find a detailed description of unlock procedure for Chi Mei based models.

02.02.2007

We are pleased to introduce new versions of Smart-Clip v3.13, S-Card v1.13 and SmartMoto v2.17.

With this release the following options are added.

1. Unlock via PREPARE cycle for the following models:
• Å378³ boot version 8.26.
• V3 boot version 8.29
2. Repair PDS for V3r firmware version R3443U2.
3. Improved Smart-Clip test-mode and enabled information detection for the models V6maxx, V3xx and V1100.

30.01.2007

S-Card www.boot-loader.com bonus for all

We've analysed the situation with S-Card www.boot-loader.com bonus and came up to the solution that every user of Smart-Clip and S-Card is entitled to the bonus even if the dongle was activated before.

So, starting from today (30.01.07), every user with activated S-Card dongle gets 180 days of bonus access to SMARTMOTO section at www.boot-loader.com *

Users, that are going to buy dongle to use it with their old Smart-Clip, will get the bonus access * starting from the day of the first update with S-Card.

The procedure of receiving the bonus is also simplified:

1. Update the Smart-Clip with S-Card to the latest version
2. Login to www.boot-loader.com with your username, password and updated Smart-Clip.
3. Enjoy your bonus access

* Free access to SMARTMOTO section will be based on STANDARD price plan and limited to 5 Gb of download traffic. In case if any price plan (STANDARD or PREMIUM) is already activated, the user will be granted with 6 months of access in accordance with the price plan that is currently activated.

22.01.2007

We are pleased to introduce new version of SmartMoto v2.16.

With this version we would like to introduce the following features:

1. Repair PDS for the following models:
• V235 fw version R444HL2;
• L7e fw version R452D;
• V1075 fw version R252211LD.
2. Unlock via TestPoint for L7e.
3. Improved "Read lang_pack" procedure for V3i and V3r (TestPoint connection).
4. V3v, V3t model detection for unlock via PREPARE cycle.
5. Added full set of drivers (including Motodrv plus USB Modem, required for PC flash) for the latest models and Application to manage handset drivers (_DrvInstaller) to SmartMoto install package.

16.01.2007

We are pleased to introduce new versions of Smart-Clip v3.12, S-Card v1.12 and SmartMoto v2.15.

With this version we would like to introduce the following features:

• Model V1150 was fully tested and proved to be supported by PREPARE cycle with specified boot versions: 06.71, 06.81, 06.82, 06.83, 06.84.
• Added Repair PDS option and full_flash for V195 fw version R3517.
• Released possibility of repairing the handset with damaged flash chip by replacing it with the used unit taken from the same model.
• Improved version detection for the latest models Z3, K1, L7e, etc …

Detailed manual "Smart-Clip and repair of the handset with damaged flash chip" uploaded to SMARTMOTO section of www.smart-clip.com

12.01.2007

We are pleased to introduce new versions of Smart-Clip v3.11, S-Card v1.11 and SmartMoto v2.14.

Developed first in the world and released free of charge for Smart-Clip users.

Listed below models, with specified boot versions, are added to support without TP (PREPARE cycle):

• E770 with boot versions: 06.71, 06.81, 06.82, 06.83, 06.84
• E1070 with boot versions: 06.71, 06.81, 06.82, 06.83, 06.84
• V1075 with boot versions: 06.71, 06.81, 06.82, 06.83, 06.84
• V3x with boot versions: 06.71, 06.81, 06.82, 06.83, 06.84

Also, V3x with Intel and AMD flash chip and V3r boot A.3.0 fw version R4515_G_08.BD.B3R are added to support by PREPARE procedure.

10.01.2007

We are pleased to introduce new versions of Smart-Clip v3.10, S-Card v1.10 and SmartMoto v2.13.

The following options are released:

• Improved flashing process for Mexican version of V150 fw R313LT_G_09.20.05R
• Resolved "Clip communication failed" issue for older models (V60, V66, etc…), while flashing with *.smf flash files.

09.01.2007

We are pleased to introduce new versions of Smart-Clip v3.09 and S-Card v1.09.

With this update the following features released:

• C11x (fw 2.5.78) "phone hacked" issue resolved and unlock procedure improved
• C139 fw version 1.3.29 is tested and proved to be supported.

NOTE
For the users, that received "phone hacked" message while unlocking C11x models, please connect the handset to Smart-Clip and perform the unlock process again.

05.01.2007

We are pleased to introduce new versions of Smart-Clip v3.08, S-Card v1.08 and SmartMoto v2.12.

With this update the following features released:

• Advanced solution, unlock and IMEI repair patch without TestPoint of E1 boot A.05 (Prepare Cycle).
• Unlock for C11x fw version 2.5.78.N (Indian release).
• Unlock for Indian release of C139 fw version 1.3.29 (beta test).

Also improved unlock via Prepare Cycle for boot version 8.28 (Razr V3)

03.01.2007

We are pleased to introduce new versions of Smart-Clip v3.07, S-Card v1.07 and SmartMoto v2.11.

This release contains the following options:

• L6/L7 i-mode fw version 13 (and higher) added to the range of supported
• Improved compatibility for i-mode modem COM port settings

From now on, i-mode modem can be set to any available COM port up number 99. In order to find out which exactly port the i-mode modem is set to or to change the port settings, please perform the following: right click on My_Computer>>Properties>>Hardware>>Device_Manager>>i-mode_modem>>Properties…

Warning
In case if i-mode modem is set to COM port 100 or higher, the handset will not get detected by SmartMoto.