S-Card Driver

S-Card Update Client

Get started

1. Download S-Card driver for your operating system from www.smart-clip.com. There are 2 driver packages available:
• 98/ME – to be used with OS Windows 98 or Millennium;
• 2000/XP – to be used with OS Windows 2000 or Windows XP.
Please pay attention to select the correct one.


2. Install S-Card driver.

Win98/ME:
• Install 2 library components;
• Run the driver installation.

Win2000/XP:
• Run the driver installation.

WARNING:
After driver installation has been performed PC must be restarted. In other case S-Card hardware will not be recognized and dongle will not work.


3. Download and install S-Card update client.

Smart-Clip update, using S-Card dongle

1. Connect S-Card dongle to PC USB port;
2. Connect Smart-Clip to PC using LPT cable;
3. Power Smart-Clip ON (warning: don’t use battery!);
4. Go to our Update Zone;
5. Update Zone uses ActiveX control, answer "Yes" to install and run it;
6. Press "Connect" button;
7. An ActiveX client should detect S-Card dongle and Smart-Clip; 
8. Press "Update" if the Smart-Clip version is out of date
9. Power Smart-Clip OFF
10. Disconnect LPT cable
11. Remove S-Card dongle from USB port.

S-Card registration/update procedure

Launch S-Card update client. Please be aware that S-Card registration/update procedure requires a stable Internet connection during the whole process.

1. Select interface language and press "Next";
2. Connect S-Card dongle to PC USB port, press "Next";
3. Wizard should detect the dongle;
4. Connect Smart-Clip to PC via LPT port and press "Connect Clip";
5. Wizard should detect the Clip and proceed to the registration/update process. Press "Next";
6. S-Card registered/updated. Press "Finish".

NOTE:
Each S-Card dongle is allowed to be registered with a single Smart-Clip device. The developer excludes a possibility when a single USB key can be used with few Smart-Clips. As soon as registration procedure is completed – the dongle and the Clip are bound to each other. If either of the devices needs to be replaced for maintenance purposes, the user should inform Smart-Clip support team at support [at] smart-clip.com.

S-Card remote repair

In case of S-Card registration/update process failure due to independent circumstances beyond manufacturer's and user's control (power failure, cut of communication line, etc…), the issue has to be reported to Smart-Clip support team (support [at] smart-clip.com). Dongle serial number, detailed description of the problem and operation log of the process should be provided. The log can be simply copied from the relevant field and pasted into e-mail letter. Within 24 hours the user will get a reply with solution regarding the problem.